Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

- Cables Are Pre-Stretched & Polished Smooth To A 1.5mm Diameter Finish - Available In Both Stainless & Galvanized Steel - Comes With 1350mm & 2350mm Cable Lengths For Both Front & Rear Brakes - 3000mm Of Black 5mm Cable Housing - 3 Sets Of Donuts - 6 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps
$2.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
$4.99
The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length
$4.99
Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. • Mounts to most seat binder bolts • Aluminum construction • Great for cantilever brake
$5.90
- Complete cable kits for internal three speed hubs
$5.99
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
$5.99
- Sold in pairs. - Allen wrench included.
$5.99
Shifting cables for Road/Mountain bikes.
$9.99
- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches
$9.99
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings
$9.99
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$10.19
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$10.19
In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules
$11.99 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road , Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
$12.99
Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners
$12.99
Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners
$12.99
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
$13.59
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.
$13.99
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
$14.99
- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB
$14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$14.99
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
$14.99
- Cables Are Pre-Stretched & Polished Smooth To A 1.1mm Diameter Finish - Available In Both Stainless & Galvanized Steel - Comes With 15000mm & 2100mm Cable Lengths For Both Front & Rear Derailleurs - 2800mm Of Black 4mm Cable Housing - 6 Sets Of Donuts - 9 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps - Rubber Shielding
$15.29
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. • Forged aluminum construction • Mounts to most frame or fork mounting holes • Great for tricky cantilever brake setups • Lightweight design • Front for fork mount / Rear for frame mount
$16.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$17.99
A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub. - Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub - OEM-level cables and housing with high-quality small parts
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes
$18.99
Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm
$22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD
Page 1 of 2 Next page