Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts and Accessories

RockShox Pike DJ
$849.99
This is Pike DJ. It’s a cousin to the award-winning Pike, which makes it look a lot like a trail fork. And you can call it a trail fork if you want — especially if your trails are named "Flip-whip," "Truckdriver" or "Cash Roll." Pike DJ is built on a stout 35mm chassis, and includes a custom tuned Charger damper and specific Solo Air system designed for like a metric ton of bottom-out progression, because your trails eventually require some landings. - Award-winning Pike Chassis - Custom-tuned Charger damper - Charger Damper with specific Dirt Jumping/Slopestyle tune (extra-firm compression) - Specific Solo Air top cap for extra bottom out progression (tunable with Bottomless Tokens) - Updated graphic package to complement the RockShox lineup
DT Swiss EX 1501 Spline ONE 30 27.5-inch Rear
$733.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
DT Swiss EX 1501 Spline ONE 25 27.5-inch Rear
$708.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss EX 1501 Spline ONE 30 27.5-inch Front
$534.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
DT Swiss EX 1501 Spline ONE 25 27.5-inch Front
$522.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
RockShox Reba RL
$499.99
One of the most successful and hard-working RockShox forks of all times capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds
Kuat Sherpa 2.0
$498.00
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
Bell Super DH MIPS
$299.99
In addition to the protection offered by MIPS Spherical, the Super DH is loaded with features, including a 360-degree wraparound, tool-free, removable chin bar beefy enough to satisfy the rigors of ASTM 1952 testing, huge eyeglass- and goggle-friendly eye-port, adjustable-height visor, snap-in camera mount, Overbrow Ventilation and X-Static padding, and a quality fit that is second to none. The end result is uncompromising protection and performance, and unparalleled versatility. The Super DH is ready to take World Cup DH runs on the chin, bang out bike park laps until the chairlifts stop running, or settle into hours of backcountry uphill grinding in search of that perfect ribbon of high-consequence singletrack.
Shimano Tiagra 10-speed Dual Control Levers
$299.99
Shimano's Tiagra Dual Control Levers offer smooth shifting and confident braking. Their aluminum lever blades are ergonomically contoured for a comfortable grip and easy access to the shift levers from any handlebar position. Large, visible gear indicators make sure you know which gear you're in.
POC Ventral SPIN Helmet
$289.99
Aerodynamic performance, safety and ventilation do not need to come at the expense of each other. By using our whole-helmet approach to development, we have been able to deliver unparalleled levels of aerodynamic performance, safety and ventilation without compromise in the Ventral SPIN. Taking inspiration from the Venturi effect, the helmet’s airflow zones allow the helmet to pass through the air with greater efficiency, making it faster. Residual air traveling around the helmet is managed by the 22° aero trailing edge, the perfect angle for minimizing turbulence, further improving aerodynamic performance. By leading air through rather than around the helmet, its wake is minimized, while its ventilation and cooling properties are enhanced. Other features of our whole-helmet approach include a fully wrapped unibody shell with an EPS liner for the ideal balance between weight and protection. SPIN (Shearing Pad INside), our patent-pending silicone pad technology; a lightweight adjustment system and an ergonomic precision strap provides a flexible, comfortable and secure fit. - Unique aerodynamic design optimized with CFD testing for enhanced aerodynamic performance and minimal air turbulence. - Helmet integrated with patent pending SPIN (Shearing Pad Inside) pads - Accelerated airflow zones, inspired by the Venturi effect, to reduce fluid drag. - Extreme cooling and ventilation due to innovative air flow design. - High performance EPS liner with targeted and optimized density to provide the ideal balance of low weight and crash protection. - Fully wrapped unibody shell construction to increase safety and helmet integrity. - Light weight size adjustment system for a personalized fit. - Easily adjustable precision straps molded into the helmet liner for extra comfort and safety. - Eye garage to keep your sunglasses securely in position when placed on the helmet. - Used and preferred by Cannondale - drapac Pro Cycling Team. - Meets EN 1078, CPSC 12.03 AS/NZ 2063:2008 certifications.
Shimano Dura-Ace 9100 11-Speed Cassette
$268.99
- Rider Tuned Gearing - Wider Gear Combination: 11 – 28T/12 – 28T/11 – 30T (New Gear Combination) - Closer Gear Combination: 11 – 25T/12 – 25T - Lightweight - CFRP & Alloy Spider Arm, 5 Titanium Sprockets - Gear Combination: 11 – 25T, 11 – 28T, 11 – 30T (New Gear Combination), 12 – 25T, 12 – 28T
Fox Racing Proframe Camo Helmet
$259.99
The Lightest and Most Breathable Full-Face Helmet We Have Ever Created The Fox Proframe Camo Helmet is the original full-face trail helmet and still the market leader. Designed to meet the needs of all-mountain riders and enduro racers, it packs MIPS technology and a dual-density EPS liner into a superlight shell along with our patented, fully integrated chinbar. The Proframe Helmet has 15 intake and nine exhaust vents which provide exceptional airflow and breathability on both climbs and descents. Thanks to its fixed design, there's no need to stop, remove, and store the chinbar. Ride wide open with the Proframe. Features - Ultra-lightweight enduro and all-mountain helmet - Patented integrated chinbar - Highly breathable, moisture wicking and anti-microbial liner - 24 Big Bore vents for unrivaled breathability - Fixed visor is positioned perfectly for maximum air flow - Fidlock SNAP helmet buckle provides quick entry and exit - MIPS reduces the rotational motion transmitted to the brain during impact - Dual density Varizorb EPS liner provides improved protection - 750g (size Medium) - Small = 20.5 – 22in - Medium = 22 – 23.25in - Large = 23.25 – 23.75in - X-Large = 23.75 – 25.25in Certifications - ASTM F1952 (including chin bar rigidity test) - N 1078 - AS/NZ 2063 - CPSC
Fox Racing Proframe Helmet
$249.99
The Proframe helmet is the lightest and most breathable full face helmet Fox has ever created. Designed to perform at the highest levels for the aggressive all mountain rider and enduro racer, it packs DH certified protection into a superlight shell via Fox's patent-pending, fully-integrated Chinbar. With 24 Big Bore vents, the Proframe offers open face level airflow and breathability to keep you cool on even the longest and most challenging climbs; and once you reach the top, it gives you the confidence to ride to your limits on even the toughest of descents. Features: - Ultra-lightweight enduro and all mountain helmet - Patent pending integrated chinbar - Highly breathable, moisture wicking and anti-microbial liner - 24 Big Bore vents for unrivaled breathability - Fixed visor is positioned perfectly for maximum air flow - Fidlock SNAP helmet buckle provides quick entry and exit - MIPS™ impact protection system reduces rotational forces in a crash - Dual density Varizorb EPS liner provides improved protection - Our lightest DH certified helmet: 750g. (size medium) Certifications: - ASTM F1952 (including chin bar rigidity test) - EN 1078 - AS/NZ 2063 - CPSC
SRAM Force 1 Rear Derailleur
$249.99
SRAM adopted the brilliant 1x technology from its MTB brethren for the Force 1. This rear derailleur features SRAM's Exact Actuation technology for precision shifts every time, across all 11 gears. With a roller bearing clutch to control chain tension and an X-Sync chain pulley to control lateral movement, you get smooth, quiet, and secure shifting and operation on even the most intense cyclocross courses. - A dedicated 1x rear derailleur - Exact Actuation for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). 10 and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - CAGE LOCK technology makes for fast wheel changes or chain installation - Weight: 261 grams (medium cage) 271 grams (long cage) - Largest Cog (teeth): 36 (medium cage) 42 (long cage)
Shimano Dura-Ace Rear Derailleur
$249.99
Shimano's Dura-Ace Rear Derailleur boasts a light and reliable cold-forged-aluminum body with a carbon cage and a wide pivot design that boosts rigidity for smooth, speedy shifts. Fluorine-coated pivots minimize friction for nearly effortless shifting. And, the oversize sealed-bearing pulleys are silky smooth, ultra quiet, and keep out dirt and water. Plus, the 7900 accepts up to a 28-tooth cassette cog for even greater gearing possibilities.
Smith Optics Ignite MIPS
$249.99
For high-performance cyclists looking for every advantage in an aerodynamic race helmet, Smith offers the Ignite helmet. Combining a new aerodynamic profile, optimal ventilation, and fully integrated eyewear storage, the Ignite is a race-ready helmet designed to elevate performance. - Lightweight Aerocore in-mold construction - Zonal ventilated protection featuring patented Koroyd material - Integrated skeletal structure - VaporFit adjustable fit system - 8 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Ultimate eyewear integration - MIPS system available in all colors - Weight: (Size M, MIPS) 11oz / 310 grams - Certification: CPSC Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm
Smith Optics Trace MIPS
$249.99
The Trace is the pinnacle helmet in Smith's performance road collection. The Trace features Koroyd, which fully surrounds the helmet providing exceptional protection and works with the internal air channels and open intake and exhaust ports produce maximum ventilation. Storage and ventilation of eyewear is crucial on those long rides, the Trace’s AirEvac system relieves hot air that builds up on your eyewear to prevent fogging. Eyewear storage is made easy by channels on the side of the helmet that hold your eyewear in place for those grueling climbs. - Lightweight Aerocore in-mold construction - Complete ventilated protection featuring Koroyd - Integrated skeletal structure - VaporFit adjustable fit system - 18 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Ultimate eyewear integration - Light mount compatible - MIPS system in all colors - Weight: (Size M, MIPS) 10oz / 280 grams - Certification: CPSC Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm
Origin8 Track Attack 42mm Fixie Wheelset
$219.99
Origin-8's Track Attack 42mm Fixie Wheelset comes in a rainbow of colors, from the subdued to the bold, so you'll know your ride is the sharpest on the block. But, they're not just a pretty face. They feature 42mm deep aluminum rims, sealed cartridge bearings and reliable DT Swiss spokes to roll strong and sure over less-than-ideal surfaces. And, they come with a flip-flop rear hub so you can choose between fixed and freewheeling!
Shimano 105 R7020 Dual Control Lever
$202.99
The Shimano 105 R7020 Dual Control Levers bring the all condition confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano. Features: - Great ergonomics cascaded from ULTEGRA - Greater reach adjust range - Redesigned internal shifting unit - Greater rider control in all conditions - Quick and intuitive rear shifting operation - Same light shifting operation as top tier systems - Lighter front shifting when paired with FD-R7000 (compared with previous generation)
Cane Creek Ergo Control Bar Ends
$195.00
Offer the perfect solution for adventure cyclists, e-bike riders, commuters, and mountain bikers who desire more comfort, more control, and more options. - Comfortable Ergonomic shape - Lock-on style bar end for 7/8" (22.2mm) handlebar - 179g per pair
Giro Terraduro Mid
$189.99
Giro's Terraduro Mid takes the classic Terraduro platform and makes it even more capable for all-mountain adventures and serious enduro racing—and it excels in even the wettest conditions. The mid top provides additional ankle support and coverage that inspires confidence when bombing through rock gardens or hiking rough trails. The breathable Ariaprene ankle scree cover moves with you to provide incredible comfort, and the laced closure allows you to get the perfect fit with seven points of adjustment. This shoe is highly water resistant with a water gasket, lace shroud and a water-sealed cleat opening. This shoe is built around a stout nylon shank that pedals like a pure XC shoe, combined with a grippy Vibram rubber outsole that keeps you steady when scrambling over rocks and logs. A reinforced toe box offers protection from scrapes and impacts. - High-quality, breathable Evofiber microfiber - Empire lace system with shroud - Rubber toe and heel reinforcement - Asymmetric ankle coverage - Water sealed cleat opening - Updated Vibram high-traction lugged outsole - Flexible forefoot zone for walking - Molded EVA footbed with medium arch support - Aegis anti-microbial treatment - Weight: 435 grams (size 42.5)
Ortlieb Gravel-Pack
$180.00
Ideal for multiday tours and self-supported races, the Ortlieb Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design—without inside pockets and a shoulder-strap pad—helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And no matter how wet the weather, your things will stay dry thanks to the proven Ortlieb waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike. - Waterproof pannier pair with roll closure - Ideal pack for bikepacking, alp crossing and trekking tours - Light weight, sturdy PU laminated rip stop nylon fabric - QL2.1 system for racks up to 16 mm, plus additional mounting hook for secure fixing to rack - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Symmetrical shape allows use on right or left side - Highly reflective 3M Scotchlite reflectors
Brooks Cambium C15 Carved
$179.99
Brooks' Cambium C15 Carved shares the same narrower shape as the existing Cambium C15, but with an ergonomic cut-out to provide relief from discomfort in the perineal area, experienced by some cyclists. This registered cutting, a sure preventive to all perenial pressure, is also to be found in the saddles of the Brooks Imperial line. Made from vulcanized natural rubber and organic cotton top, combined with a die-cast aluminum structure and tubular steel rails. For performance, a distinct dampening effect is delivered by the classic Brooks construction keeping the rider in unparalleled comfort mile after mile. A sensible choice for the performance or sports cyclist. Made in Italy. - Length: 283mm - Width: 140mm - Height: 52mm - Weight: 395 grams - Frame: Steel
Kali Protectives Interceptor
$179.99
The Interceptor. Designed for performance, engineered for impact. Lightweight, deep coverage, incredible ventilation, enhanced protection. When all you want to do is shred your mountain bike, we bring you the revolutionary new Interceptor, the next stage in head protection. - Technology: Nano Fusion, LDL - Features: Anti-Microbial Pads, Adjustable Visor, Accessory Mounting System, Locking Buckle & Sliders - Material: PC Shell & Under Wrap, EPS Foam - Vents: 24 - Weight: 390g / 13.7oz - Certification: EN 1078, CPSC - Intended Use: Enduro, Trail - Small/Medium = 52 – 58cm - Large/X-Large = 59 – 64cm
Topeak BabySeat II (w/Disc-mount Rack)
$179.99
Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included disc brake-compatible rear rack.
Shimano SLX BL-M7100/BR-M7120 Disc Brake and Lever
$174.99
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston design is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads
Topeak BabySeat II (w/Rack)
$169.99
Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included rack.
WTB Deva SLT - Women's
$169.99
WTB's SLT Deva utilizes a firm and supportive shell for excellent pedaling efficiency and titanium rails for minimal weight. The saddle has smooth curves for maneuverability and a lightweight design making it the perfect full-support women's saddle. Plus, the rear Comfort Zones disperse rider weight for long-distance comfort.
Chris King InSet 8
$164.99
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 8 is compatible with tapered 1-1/8 - 1-1/4-inch forks and frames using a 44mm headtube.
Shimano RC5 Shoes
$160.00
Lightweight, high-performance mid-range road shoe. Synthetic Leather - Lighter, stronger and more durable than natural leathers Carbon Sole/Mid Sole - Carbon fiber composite sole/mid sole Wider Cleat Adjustment - Expands range for mounting cleats - Surround wrapping upper structure reduces overlap and provides a glove-like fit - Low stack height midsole helps stabilize foot, maximizing power transfer and efficiency - Integrated sole and upper construction sets a new level of fit, stability, rigidity, and lightweight performance - Mesh/TPU/Synthetic leather composite upper provides a comfortable fit and better breathability - Lightweight carbon fiber reinforced nylon sole for power transfer
Page 1 of 44 Next page