Wheels

• Aluminum hub body with hollow steel axle • Fixed/Free • Sealed bearings • 120mm or 130mm rear spacing • 32 hole • 282 grams

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm

The 888 FX front wheel features the beastly Cinema 888 rim, laced up to the Cinema FX front hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples providing superior strength. This wheel comes standard with a rim strip and Cinema CF nylon hub guards, making it ready to go out of the box!

The 888 Cassette wheel features the super-strong Cinema 888 rim, laced up to the updated Cinema VX3 cassette hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples, providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards, making it ready to go out of the box!

9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 460 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.

With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.

The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.

With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

FSA's NS Wheelset is a tremendous value in an alloy MTB, cyclocross, and gravel bike wheelset with renowned FSA reliability and high-performance technology. Suitable for use on a wide range of price point bikes. - Asymmetric, 25mm deep x 26.1mm wide alloy rim - Tubeless compatible - 148 - 15 x 110mm TA front hub and 12 x 148mm TA - Cartridge bearings (2F+4R) - 2-cross double butted spokes with brass nipples - Artisan built, entirely by hand - Includes tubeless valves (1 pair) and spoke protector - Compatible with cyclocross and gravel bikes

10x135mm conversion endcaps for Hope Pro 2 Evo rear hubs.

Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs

These lightweight valves help prevent clogging from tubeless sealant. - Aluminum - 40mm length

Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width

Get rolling again with a replacement freehub body for your Mavic wheels. - For Mavic ID360 hubs

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs.

Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.

Elite Series skewers for fat bike applications AL6061 alloy lever with CrMo axle Available for 135mm, 150mm, 170mm, and 190mm OLD spacing

- Elite Series skewers for road, cyclocross, gravel, and MTB applications - AL6061 alloy lever with CrMo axle - Available for 100mm, 130mm, and 135mm OLD spacing - Spacing / Axle: QR - Wt: 53g

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

- Replacement Cassette body for Origin8 hubs

Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.

Replacement Cassette body for Origin8 hubs - Use: 8-10s Cass